Selecting the Proper Cable Tie for the Job


Our November speaker will review various types of cable ties and their applications with respect to extreme conditions, The speaker will review application considerations including  life expectancy, and economic issues.  

When I was a young salesperson, I sold a few dozen cast resin power transformers to a client who used them to replace existing liquid filled substation transformers.  The cast resin transformers were a perfect fit,  efficient, eliminated the risk of fluid leaks, offered 50% overload capacity, and were quiet as could be.  The customer was happy; until one night when one of the cast resin transformers experienced a fault, taking the substation and the factory off line.    A cable tie supporting the temperature monitor control wiring became brittle and broke, allowing the wiring it was supporting to fall against the  HV tap hardware. Boom!   Finn received an unpleasant 2:00 AM phone call.   Fortunately, nobody was injured, but they could have been, for the standard NEMA 1 substation transformer enclosure is not designed to contain an arc flash.  The transformer manufacturer used general purpose nylon cable ties rather than ties specifically designed for high temperature applications.  Engineers apply significant resources to design reliable systems, specifying the right circuit breakers, fuses, and distribution equipment; yet, an improperly applied small, seemingly simple item, like a cable tie,  can  lead to  system failure, financial loss, injury, and worse.  Join us for a discussion on specifying the right cable tie for your crital applications.    

  Date and Time




  • San Francisco Italian Athletic Club
  • 1630 Stockton St, San Francisco, CA 94133
  • San Francisco, California
  • United States 94133
  • Click here for Map
  • Chair:

    Vice Chair:

    Treasurer: Daniel Castro

    Secretary:Michael Poling

  • Starts 24 August 2018 03:01 PM
  • Ends 13 November 2018 03:01 PM
  • All times are US/Pacific
  • Admission fee ?
  • Register


Cari Helberg of HellermannTyton – North America


Selecting The Right Cable Tie for the Job


Cari Helberg is the Sales Application Engineer, supporting the HellermannTyton electrical division for North America. She is a licensed master electrician, and an IAEI-certified electrical inspector.  She has served as president of the MN International Electrical Inspectors Association, and as on alternate on CMP 19 for the National Electrical Code.  In her spare time, she teaches classes in code calculations, code update, and NEC Article 690.



Address:-, -

****  Fabulous MEETING LOCATION for 2018****  SAN FRANCISCO ITALIAN ATHLETIC CLUB  1630 Stockton St, San Francisco, Closest Garage,  721 Filbert Street, offers validated parking.   See your Maps App.