Power Transformer Design and Manufacturing
The meeting will be in two parts:
1. Transformer Design and Design Parameters- The basics of Transformer Design. The presentation will explain how a transformer designer interprets parameters such as MVA, lightning Impulse, Switching impulse, Percentage Impedance supplied by a customer. See details below.
2: Transformer Manufacturing Processes - Industry wide manufacturing process to build a transformer in the shop floor. Processes will cover Core Construction, Insulation, Windings, Core and Coil, Processing, Tanking, Testing and Shipping. See details below.
Date and Time
Location
Hosts
Registration
- Date: 24 Feb 2015
- Time: 05:00 PM to 08:30 PM
- All times are (GMT-06:00) US/Central
-
Add Event to Calendar
- Schneider Electric/Square D - Front Lobby NE side
- 3700 6TH Street SW
- Cedar Rapids, Iowa
- United States 52404
- Click here for Map
- Starts 29 January 2015 05:00 PM
- Ends 24 February 2015 05:00 PM
- All times are (GMT-06:00) US/Central
- 0 spaces left!
- No Admission Charge
- Menu: Beverages provided
Speakers
Ronnie Minhaz of TC Services Inc
Power Transformer Design and Manufacturing
Biography:
Ronnie holds B.Sc. degree in Electrical Engineering from University of Manitoba, Canada. Before founding his own company “Transformer Consulting Services Inc(www.tc-servicesinc.com)”, Ronnie worked as Transformer Designer at Pauwels Canada(Manufacturer), as Equipment Engineer at SNC Lava Lin(EPCM) and Enmax Power(Utility), as Substation Lead Engineer at McGregor Construction(Substation Construction). Ronnie is a registered professional engineer in the province of Alberta, Canada and an IEEE member. Ronnie held various leadership positions at IEEE Section level and a regular member of IEEE PES society.
Ronnie Minhaz of TC Services Inc
Power Transformer Design and Manufacturing
Biography:
Ronnie Minhaz of TC Services Inc
Power Transformer Design and Manufacturing
Biography:
Ronnie Minhaz of TC Services Inc
Power Transformer Design and Manufacturing
Biography:
Agenda
Part 1: Transformer Design and Design Parameters
Abstract: The presentation will be on the Basic of Transformer Design. The presentation will explain how a transformer designer interprets parameters such as MVA, lightning Impulse, Switching impulse, Percentage Impedance supplied by a customer. It will touch on Power rating [MVA], Core, Rated voltages, Insulation Coordination, Short-circuit Impedance, Short-circuit Forces, Loss evaluation, Temperature limits, Cooling, Sound Level .. etc. It will also explain overload and life expectancy of a transformer as well when Delta winding is needed in Wye-Wye connection. The presentation will answer why in North America we like to regulate from low voltage side whereas in Europe regulates from high voltage side
Part 2: Transformer Manufacturing Processes
Abstract: The presentation will be on the Industry wide manufacturing process to build a transformer in the shop floor. Processes will cover Core Construction, Insulation, Windings, Core and Coil, Processing, Tanking, Testing and Shipping. Some of the hold-points during the processes will be explained as well what a customer should look into while doing factory inspection. The presentation will also cover reconnection both in LV and HV, LTC Tap changer both in tank and separate tank, Lead works.